Page 8 - Part II：Assessment of conformity

Page 8 of 18 Report No. 20(04)0336P

EN 149:2001+A1:2009
Clause Requirement + Test Result - Remark Verdict

No special measuring devices and methods P
are specified, commonly used devices and
methods shall be used.
8.2 Visual inspection P

The visual inspection is carried out appropriate P
by the test house prior to laboratory or practical
performance tests.

8.3 Conditioning P
8.3.1 Simulated wearing treatment P
A breathing machine is adjusted to 25 cycles/min 25 cycles/min P
and 2,0 l/stroke. 2,0 l/stroke.

For testing, a saturator is incorporated in the a saturator incorporated by P
exhalation line between the breathing breathing machine
machine and the dummy head, and the dummy head

The spilling out of the dummy’s mouth and Incline considered P
contaminating the particle filtering
half mask the head shall be incline
8.3.2 Temperature conditioning P
Exposet masks to the following thermal cycle: P

a) for 24 h to a dry atmosphere of (70 ± 3) ℃; P
b) for 24 h to a temperature of (-30 ± 3) P
℃;
Allow to return to room temperature for at least 4 4h P
h between exposures and prior to subsequent
testing.
8.3.3 Mechanical strength P

Conditioning shall be done in accordance with EN P
143.
8.3.4 Flow conditioning P

A total of 3 valved particle filtering half masks P
shall be tested, one as received and two
temperature conditioned in accordance with
8.3.2.

8.4 Practical performance P
8.4.1 General P
A total of 2 particle filtering half masks shall be P
tested: both as received.
All tests shall be carried out by two test P
subjects at ambient temperature and the test
temperature and humidity shall be recorded.

TRF No. EN 149_1A