Page 26 - CATALOGO MASCARILLAS KN95-FPP2

Page 17 of 18 Report No. 20(04)0336P

EN 149:2001+A1:2009
Clause Requirement + Test Result - Remark Verdict

9.2.6 Sub-assemblies and components with P
considerable bearing on safety shall be
marked so that they can be identified.

10 Information to be supplied by the manufacturer P
10.1 Information supplied by the manufacturer shall be English P
at least in the officiallanguage(s) of the country of
destination.
10.3 The information supplied by the manufacturer See packaging P
shall contain all information necessary for trained
and qualified persons on
- application/limitations;
- the meaning of any colour coding;
- checks prior to use;
- donning, fitting;
- use;
- maintenance (e.g. cleaning,
disinfecting),
if applicable;
- storage;
- the meaning of any
symbols/pictograms used of the
equipment.
10.4 The information shall be clear and Clearly considered P
comprehensible. If helpful, illustrations, part
numbers, marking shall be added.
10.5 Warning shall be given against problems likely to See packaging P
be encountered, for example:
- fit of particle filtering half mask (check prior
to use);
- it is unlikely that the requirements for
leakage will be achieved if facial hair passes
under the face seal;
- air quality (contaminants, oxygen
deficiency);
- use of equipment in explosive atmosphere.

10.6 The information shall provide recommendations P
as to when the particle filtering half mask shall be
discarded.

TRF No. EN 149_1A