Page 25 - CATALOGO MASCARILLAS KN95-FPP2

Page 16 of 18 Report No. 20(04)0336P

EN 149:2001+A1:2009
Clause Requirement + Test Result - Remark Verdict

Testing of penetration, exposure and storage P
shall be done in accordance with EN 13274-7.

9 Marking P
9.1 Packaging P

The following information shall be clearly and Complied, clearly marked P
durably marked on the smallest commercially
available packaging or legible through it if the
packaging is transparent.
9.1.1 The name, trademark or other means of See packaging P
identification of the manufacturer or supplier.
9.1.2 Type-identifying marking. P

9.1.3 Classification: FFP1, FFP2, FFP3. FFP2 P
9.1.4 The number and year of publication of this P
European Standard.

9.1.5 At least the year of end of shelf life. P
9.1.6 The sentence ‘see information supplied by the English used P
manufacturer’, at least in the official language(s)
of the country of destination, or by using the
pictogram as shown in Figure 12b.
9.1.7 The manufacturer’s recommended conditions of See packaging P
storage (at least the temperature and humidity)
or equivalent pictogram, as shown in Figures
12c and 12d.
9.1.8 The packaging of those particle filtering half P
masks passing the dolomite clogging test shall
be additionally marked with the letter "D".
9.2 Particle filtering half mask P
Particle filtering half masks P

Complying with this European Standard shall be P
clearly and durably marked with the following:
9.2.1 The name, trademark or other means of P
identification of the manufacturer or supplier.
9.2.2 Type-identifying marking. P
9.2.3 The number and year of publication of this EN 149:2001+A1:2009 P
European Standard.
9.2.4 The symbols FFP1, FFP2 or FFP3 FFP2 NR P
according to class.

9.2.5 If appropriate the letter D (dolomite) in FFP2 NR D P
accordance with clogging performance. This
letter shall follow the class designation (see
9.2.4).

TRF No. EN 149_1A